What Kind Of Material Is Used To Make Stainless Steel Screws?

The first thing to look at is the combination of iron or stainless steel. The combination screw of iron is also the carbon steel combination screw we often say. Carbon steel combination screws are generally produced with screw wires 1006, 1010A, 1018, 10B21, etc. The 4.8-stage combination screws are generally produced with screw wires 1006, 1010A. 1006 screw wire is compared with 1010A. The quality of the 1010A screw wire is much better. The hardness of the combined screws produced by the 1006 screw wire is harder than that produced by the 1010A. However, the screws produced by the 1006 wire can harden even harder, and they are all of the original hardness. The screws produced by the 1010A screw wire can be hardened. After hardening, it is generally harder than not hardening. . But in fact, we do 8.8-level combination screws, we generally use 1018 or better screw wire 10B21. After producing the natural color combination screw, it needs to be hardened in the heat treatment plant. After the hardening is completed, it is necessary to remove hydrogen in the electroplating factory first. In addition to hydrogen in the deplating, this first dehydrogenation is to prevent the screw from hydrogen embrittlement and prevent the spring pad in the combination stainless steel screw from breaking.